![]() |
shell valley wire harness? (painless)
Okay everyone here is my problem, I hope someone can help me out.
When I turn on my turn signal, all four lights blink (two parking/turn lights up front and both rear lights) as well as all the dash lights. along with this problem when I step on the brakes, all four lights turn on again and stay on... along with all the dash lights. Can anyone give me some insight on what I might be doing wrong? Is the dash lights coming on normal? thanks |
problem solved.
|
what was the problem?
|
I had wires crossed. Hazards crossed with blinkers... so everything was turning on.
|
| All times are GMT -7. The time now is 08:27 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: