|
Need help with Throttle linkage
Guys,
HAving a real hard time with the linkage supplied by SVC. Just cannot getting it to wide open throttle with the supplies I have. Could anyone email or post pictures of thier linkage and how it is set up so that I can see how others have rigged it to work. It feels like I have tried everything, but there must be a way. Maybe I have the short an long legs reversed. I just do not know. Help. Romanbuilt |
Send me your email address and I will send you pics of my linkage, I used some of SV stuff and fabricated the rest.
Mike mpbp43@sbcglobal.net |
Mike
I sure would like to see pics of your setup also. I'll sent you an email. Thanks Dave |
I also had to do some fabricating on my linkage. The pedal assembly was OK and the linkage between the carburetor and firewall was OK, but I had to make a piece to connect the pedal linkage to the linkage on the firewall. It turned out fine and gives me some adjustability of the pedal height.
|
Romanbuilt,
My guess your levers are slipping on the rod that runs parallel to your fire wall. I would suggest that either you spot weld them in place or drill a small hole thru the lever and rod and use a roll pin once you get everything in the position you want. Clois |
| All times are GMT -7. The time now is 01:19 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: