Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Shell Valley Companies (http://www.clubcobra.com/forums/shell-valley-companies/)
-   -   SVC guys with 17" wheels... (http://www.clubcobra.com/forums/shell-valley-companies/79570-svc-guys-17-wheels.html)

blueovalfanatic 06-07-2007 04:20 PM

SVC guys with 17" wheels...
 
I am looking for the overall height of an "average" or "common" 17" wheel / tire combo- from the floor to the top of the tire. I am trying to compare them to the wheels and tires I currently have on my chassis (which will be used just to move the car around), so that I can install the transmission crosmember- as the manual says to install the engine so that the carb base on the intake is level.

The tire currently on the back is pretty tall, so what I am thinking is if the tire should be 2" smaller in height, I could raise the front of the frame 1" to compensate, and then level the carb base out to figure out where to bolt the crossmember in.

Also, I know that 295/50 R50's will fit, but these numbers mean nothing to me, as I have no idea how tall they are.

Thanks,
Greg

Sydney 06-07-2007 04:58 PM

Hi Greg,

My front tires are 235-45-17 with 24 psi are 24.5" tall. The rears are 285-40-17 with 26 psi at 25.25" tall. I didn't have my wheels and tires on yet when I installed the engine and transmission. i just made sure the frame was level on the jack stands when I leveled the carb base. It worked out fine. HTH

Sydney

CJ428CJ 06-08-2007 08:31 AM

You can find what you're looking for at tirerack.com. Here's a direct link to the specs for the Michelin Pilot Sports. Other manufacturers may differ slightly but they'll be close: http://www.tirerack.com/tires/Spec.j...e1=yes&place=0

Chris

Terry Stapley 06-08-2007 12:03 PM

Greg, 26" from floor to top of tire!!

285-40-17

blueovalfanatic 06-08-2007 02:21 PM

Hmmm...OK, that makes sense. I never thought of it that way, as to level it with the frame itself. I guess the frame should be pretty level, as the pipes are bolted to them. LOL

Thanks CJ for the link. I will check it out. And thanks Terry. I forget how tall the ones are that are on it now, but I will go out and check.

Thanks, and have a great weekend!
Greg


All times are GMT -7. The time now is 09:40 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: