-
Shop Talk
(
http://www.clubcobra.com/forums/shop-talk/)
| Michael C Henry |
10-08-2009 08:39 PM |
Tilton 90° bias coupler
I just ran accross a part that I hadn't seen before that would take care of concerns I had had about installing a remote bias adjuster in my car. I researched this a little. Tilton 72-560 fits 3/8"x24 threaded shafts, 72-561 fits 7/16"x20 threaded shafts , and 72-562 fits 1/2"x20 threaded shafts. It appears to be a right angle adapter connected on the end of the threaded bias adjusting shaft and the flex cable connected to the other. The units seem to be a little pricey. I allready have the cable assembly but routing was a concern this would overcome some of these problems. I was wondering if somone else has used one of these Were they durable, relieable, and problem free?
|
| vector1 |
10-09-2009 06:50 AM |
i have one i'll sell you, tried but couldn't use it. would have to see if it is still in operating condition.
|
| Michael C Henry |
10-09-2009 03:57 PM |
Why couldn't you use it?
|
| vector1 |
10-09-2009 08:19 PM |
i could make it fit, but it would not allow the full range of adjustment of the threaded bias bar. otherwise i would have used it. i'll probably make a hole through the side of the tunnel when i do install the adjusting cable.
|
| Kevin |
01-23-2010 06:14 PM |
I'm looking for one of these right angle guys also if anyone else has one.
Kevin
|
| vector1 |
01-23-2010 07:21 PM |
i still have the one if you want to shoot me a price.
|
| Kevin |
01-24-2010 03:12 PM |
Is it new? And is it the 3/8-24 size? How about 40 bucks and I will pay for freight.
Kevin
|
| jmarsey |
01-24-2010 04:18 PM |
They are a precision, smooth and durable little piece. Needed one on the spec racer and works great.
|
| vector1 |
01-25-2010 08:12 AM |
1 Attachment(s)
unused, used for mock up. they sell for $87-$95 plus shipping, i'll do $60 to the door. and if you respond to this one time limited offer i can have it in the mail today. part #72-560
|
| Kevin |
01-25-2010 11:04 AM |
That sounds good to me, let me know how you want payment. I can do anything Paypal, check, cc what ever you like.
Kevin
|
| vector1 |
01-25-2010 01:46 PM |
i'll send you a pm with the info.
|
| All times are GMT -7. The time now is 05:12 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
