|
Welding Chrome-moly yokes to mild steel tube.
With having various bits on my car welded with Mild steel to chrome-moly tube, it was time to get my driveshaft sorted, I have Strange "chrome-moly" 1350 weld ends, the driveshaft shop have said that 3" Mild steel 0.83 tube is sufficient and has less chance of cracking than Chome-moly tube, so he has made a beautiful job of electric welding up the driveshaft etc.
My understanding was that mixing materials is ok but not preferrable, we only have a bit over 600hp in a light weight car so it should be ok or should I have done some more research any ideas..............! |
| All times are GMT -7. The time now is 09:06 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: