|
Who makes billet cam cores ?
Who makes billet cam cores ?
I'm working with Isky for their valvetrain but, they want a solid cam core to grind. (don't know why) I know most company's like CompCams, do not make them, they just do grinding. By the way, look at Isky's newer "EZ-ROLL" needle free, lifters. http://www.iskycams.com/pdf/2-ISKYCa...Page%2029).pdf |
Callies. Saw hundreds of them sitting there. Doubt they will sell any to you though. They make them for most cam manufacturers.
|
That's the issue. Isky does not have a cam for the FE, so they need a blank to grind themselves. They want the entire valvetrain to be Iskys.
You would think,.... they would have some company to deal with, but I guess it's up to me. :rolleyes: **) I really like their lifters. ;) |
try lee holman, they do cam grinding he may have a source for you
http://www.holmanmoody.com/memorabilia.html fred |
|
Try Crower Cams!
|
There seems to be a problem getting a lot of cores right now. I would assume that Isky is having a hard time getting cores like other companies are right now. Ask them if they can regrind a camshaft that is already made. This may be an option or just get your camshaft from someone that has cores.
Good luck, Keith Craft |
I'll check into all that's listed.
Just talked with Bob at Callies. Their in the process right now,.... of producing a core but, they can's find a plan. Ford is trying to locate one for them. Even if they had the plan, their still out apx. 8 weeks. I guess Crane did not keep a lot of plans themselves, so Callies is having a hard time with some of the cam plans. Sounds like Crower has some on order. Thanks. |
Kev....try Crane....or go SBC...hahaha
|
Actually, since I'm one that,...dares to b different, I should put a Hemi, in the car.
|
Just talked with John of Howard's Camshafts and they do have a FE mechanical roller, 280 @ 50/410, apx. 700 + lift. Enough meat to custom grind. $121.99.
I have call in for Richard at Isky's. What do you guys think of Howard's mechanical roller cam's & valvertrain, including rockers ? Haven't heard much. Does T & D still beat them and most others ? (maybe besides Crower) |
Camshaft, Shmamshaft!!! Everybody knows that the real horsepower is in flywheels and oil pumps. That is where you should put your money.
|
| All times are GMT -7. The time now is 01:10 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: