Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Shop Talk (http://www.clubcobra.com/forums/shop-talk/)
-   -   overheating (http://www.clubcobra.com/forums/shop-talk/10753-overheating.html)

Charlton 09-03-2001 10:35 PM

overheating
 
For all you guys who have overheating problems. Try checking your heater hoses and make sure all the air is out of the lines. My 428 has been running hot since day one. I disconnected the heater hoses and they were dry. Apparently air in the cooling system is a bad thing. I just got back from a 400 mile trip and the car ran great! I am going to put an expansion tank in the system and hopefully my heating problems are over. I just drove my car at sea level after living at 6000 ft. Oh my God!


All times are GMT -7. The time now is 06:47 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: