Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Shop Talk (http://www.clubcobra.com/forums/shop-talk/)
-   -   FE Heater Connections (http://www.clubcobra.com/forums/shop-talk/11090-fe-heater-connections.html)

Bruce Botti 09-19-2001 08:57 PM

FE Heater Connections
 
Hello all! I've got an FE heater question. Where do you hook up the heater hoses on an FE? I assume the two connections on the intake manifold. There is no waterpump connection like on a Windsor.
Thanks,
Bruce

Cobranut 09-19-2001 09:46 PM

Bruce,

If I remember correctly, one of my heater hoses does come from the water pump, or very near to it.
The other connects to a fitting in the intake.
I'll try to take a look at it tomorrow and get back to you.

Later,


All times are GMT -7. The time now is 01:08 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: