-
Shop Talk
(
http://www.clubcobra.com/forums/shop-talk/)
- -
Mustang II IFS
(
http://www.clubcobra.com/forums/shop-talk/112219-mustang-ii-ifs.html)
| Ralphy |
08-22-2011 05:43 PM |
Mustang II IFS
I need new ball joint boots for an aftermarket Mustang II IFS. They are the threaded type. Can anyone tell me what type BJ's these are? Tried Auto Zone and the 5.0 Mustang were similar but for a larger stud.
Ralphy
|
| Jerry Clayton |
08-22-2011 07:35 PM |
The later so called 5.0 Mustang is different than the Pinto and Mustang 2
|
| mreid |
08-22-2011 07:36 PM |
Get ball joints for a 78 Mustang V8.
|
| tcrist |
08-22-2011 07:47 PM |
Some of the after market tubular a-arms use Mopar ball joints from what I understand.
|
| Ralphy |
08-22-2011 07:52 PM |
|
| All times are GMT -7. The time now is 01:50 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
