Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Shop Talk (http://www.clubcobra.com/forums/shop-talk/)
-   -   Any StreetBeast/CMC builders out there know what these are for? (http://www.clubcobra.com/forums/shop-talk/121502-any-streetbeast-cmc-builders-out-there-know-what-these.html)

EarlsflyinCobra 07-19-2013 09:34 PM

Any StreetBeast/CMC builders out there know what these are for?
 
http://www.clubcobra.com/photopost/d...rawhatisit.jpg
The title says it, what are these.....two of them about 18" wide and 48" long, cut out of a hard (melonite?) I have looked thru the manual forward, backwards, and sideways and kind find no mention of them:JEKYLHYDE

DonB 07-20-2013 11:15 AM

I've got a cmc kit and I can't find anything like that in my pile of parts. The only panel I got has to be cut down the middle and has curved cuts on each side and they then cover the opening under the doors. Really unusual for cmc or Street beasts to give you anything extra. I had to sue just to get most of what I paid for. Don

EarlsflyinCobra 07-20-2013 05:33 PM

Yeah, I got those too, but these I can't find reference to anywhere. I thought they might be for the door upholstery to attach to but they are wayyyyyyyyyyyy to big for that.......:JEKYLHYDE

RedEye 07-20-2013 08:12 PM

Never seen anything like them.

PDUB 07-28-2013 08:59 PM

Could they be trunk interior side panels ready to be cut to shape... big end up front, little end in back?

Dirty Harry 07-29-2013 06:27 AM

templates used to cut carpet to size?

EarlsflyinCobra 07-29-2013 03:15 PM

Nope and nope....:( I was thinking maybe to make a panel behind the seats but why two? I'm soooooooooooooooo confused.....LOL:confused:

52chevyred 08-03-2013 01:26 PM

Earl: I do believe they were for your door panels, but my interior guy said they were "worthless" (go figure). :). I would just use them to catch oil on the shop floor, then discard.

Are you any closer to finishing your Cobra than you were?

EarlsflyinCobra 08-03-2013 06:44 PM

I'm getting closer, but it still seems the damn thing is fighting me every step of the way......I went to hang doors last weekend and the drivers door doesn't seem to fit, but the passenger door seemed to almost fit**)**)I'm currently working on a couple of wiring quirks, easy fixes, just have to be done :eek: :eek: I've also got to put in a larger hood scoop. And to answer your statement about the panels, I thought they might be for the door panels but since they were so large I wasn't sure. I'm probably going to use one to close in the area behind the seats.:3DSMILE::3DSMILE:


All times are GMT -7. The time now is 10:31 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: