|
Rear End Prep
I am about to start cleaning my rear end in preparation for painting it with POR-15. It is a new rear end that sat for some time. There is a peice bolted onto the bottom of it that appears to be a shipping bracket, but I am not sure. It has soft rubber bushings. There do not appear to be any mounting holes on this. Any ideas? Can I remove it? Any pictures of finished rear ends that I can take a look at?
|
That hanging thing is there to help disrupt harmonics on the stock Mustang driveshaft. You don't need it, shortening the DS to 10.5" pretty much gets rid of any harmonics. Use it a garage door stop.
Later, Greg |
| All times are GMT -7. The time now is 11:00 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: