Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Shop Talk (http://www.clubcobra.com/forums/shop-talk/)
-   -   Electric Power Steering (http://www.clubcobra.com/forums/shop-talk/128538-electric-power-steering.html)

saltshaker 04-13-2014 06:35 AM

Electric Power Steering
 
Has anyone installed this on their cobra? If you did could you share how and the parts.... I read that the pump from the MR2 works well but nit sure what else is needed.
Jon

map 04-13-2014 06:42 AM

Why do you need PS in a Cobra?

saltshaker 04-13-2014 07:32 AM

Power Steering
 
I'm having a problem with my shoulder and neck, it's becoming more uncomfortable during and after driving and I don't want to stop driving the cobra.
Just looking into the idea..,
Jon

Jerry Clayton 04-13-2014 09:12 AM

check out the units on the new Camaro

bobcowan 04-13-2014 09:32 AM

I have not heard of anyone using the MR2 or S2000 components. As I understand it, they are integral to the steering column, and difficult to integrate. They are also both speed sensitive, so it needs some input to make it work right. Not insurmountable problems, but I have not seen anyone do it yet.

Flaming River makes a kit that is similar to those two, but it's very expensive.

There is another electric P/S kit that uses an electric motor to run the P/S pump. I can see that would have some advantages.

I have the same problem you do. Some military injuries make it difficult to muscle the car around the track on the week ends. 200+ high speed corners during the course of the week end can really wear you out.

After some research, I spent big bux on race ready components: KRC pump, braided lines, AGR rack, etc. Expensive, but it works well and should be reliable.

For a street car, I'd use stock Mustang components. Simple, inexpensive, easy to come by, and reliable.

dallas_ 04-13-2014 09:32 AM

Also try Fast Freddies.
He has a package that has everything you need. Electric pump, switches, hoses, reservoir. I'm not sure he has the ps racks, but those are easily obtained.

Rick Parker 04-13-2014 09:44 AM

We have them on the Chevy Cruze since its intro.

saltshaker 04-13-2014 01:43 PM

Steering
 
Thnx for the info, I looked at Fastfredies and inquired if it would work on a mustang ii rack...not sure why it wouldn't.
Jon

FWB 04-13-2014 03:10 PM

77 mustang ps rack
75 pinto pump
69 full size ford ps bracket
fe dual wp pulley
need to make up hoses

using the pinto pump eliminates the need to worry about pressure from a saginaw pump

just got done doing a 80' kellison works perfect

damage 04-13-2014 05:53 PM

check out KYB they do a neat little electric power steering unit that will fit perfect behind the dash and connect to your existing steering shafts etc

I have used these in racing applications and they cop a fair bit of treatment.

FatBoy 04-14-2014 05:16 AM

Have a look at these. I've heard and read great things about them:

Home

Paul

RRD 04-14-2014 06:02 AM

Electric Power Assist
 
Well, sort of... I did not use this brand, but installed a unit from an Opel Corsa, used. It came off of Ebayuk.com, was all clean and checked out, and additionally came with a potentiometer to vary the amount of assist.
The Corsa unit is very compact. It works great. I have a '66 TVR Griffith with very large front rubber, and absent the electric assist, it's extremely tough.
The gentleman I got it from was from Ireland, and lists frequently. If you look for him and can't locate, I can retrieve his user ID.
I really think its great. The Corsa unit fit right up under the dash when no other would.
Cheers,
Roger

strictlypersonl 04-14-2014 08:21 AM

We've installed this kit into one of our 427s. It's relatively cheap, but it lacks any speed control, so we also installed a switch to cut off the boost. Otherwise, the steering is really too dead at speed. The owner was very pleased at how it worked. With a little work, you could probably integrate a speed sensor to automatically disable the boost over 20 mph.

As has been said, there are more sophisticated (speed-controlled) boosters, but the price is way up there. "Adapting" a production electric booster is not easy, since they typically get several inputs from the car's main computer. That means, in a conversion, you have to "fake" some input through a separate controller.


All times are GMT -7. The time now is 01:36 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: