|
Superformance Quick Jack Spacer tube length?
Hi all,
First post here, recently acquired SP02400 and I'm changing out the bumperettes for quick jacks. What's the correct size (length) of the tube spacer (ferules) for quick jacks. When I took overriders off I had a two pieces of tube on each bolt. Meaning there was the one you could see then another small pieces behind the body that fell out when I pulled threaded rod out. I imagine it's better easier to install if they are one piece. Just need to know correct length for proper spacing. Hope that makes sense to you all; thanks in advance for any help!!! Cheers!! |
Just as long as you don't intend on jacking the car up using those quick jacks!:eek:
|
Yeah definitely not....:cool:
Quote:
|
A better reference to use as follows:
The tubes in front should extend to 1” behind the fiberglass of the front radiator opening directly across from it. The rear tubes project out approximately 2”. You will want to use washers against the frame mounting points to fine tune the projections so the quick-jacks are perpendicular to the ground. Remember, cosmetic use only. Happy to send photos if you email me. (See below) Also: Just for fun, start a note pad to record which quick-jack and how often these little sweeties jump out take a chunk out of your shins when you walk by them carelessly. Left rear is ahead on my list with right front a close second. Blas |
Thank you Blas; I'll email you now sir!
Note pad is ready and just ordered shin guards! |
| All times are GMT -7. The time now is 10:37 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: