Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Shop Talk (http://www.clubcobra.com/forums/shop-talk/)
-   -   Convertible top glueing to front bows (http://www.clubcobra.com/forums/shop-talk/147810-convertible-top-glueing-front-bows.html)

Michael C Henry 07-02-2024 02:13 PM
Convertible top glueing to front bows
 
I had a new top made a couple of years ago. The top material seemed a little short and was glued on one strip inside the front bows. It's now separating at the glued strip. I did a search earlier today and found a thread where ( I) was asking and had several replies that were spot on. The thread had Step by step instructions and ERA had a reply with colored pictures and diagrams. Right on just what I wanted. I cannot find that again to save my butt. I'm going to have a local shop help take care of the top and bow situation. I need to show them something. The thread was dated I think 2001 a while ago I know.

PaulProe 07-02-2024 06:55 PM
Mike
Is this what you're looking for?

http://www.clubcobra.com/forums/shop...able-tops.html

Paul

Michael C Henry 07-04-2024 12:29 PM
Yes, Thank you, That is exactly what I couldn't bring back up. I copied everything. My new Top was made by an outfit in West Seatle. They apparently do not do Cobra replicas very often. I had the EM hardware in a box. They only glued the top material to the inside of the front bow. I'm sure once glued as ERA described , I will not have another problem with the top.

Michael C Henry 07-04-2024 12:33 PM
Yes, Thank you, That is exactly what I couldn't bring back up. I copied everything. My new Top was made by an outfit in West Seatle. They apparently do not do Cobra replicas very often. I had the EM hardware in a box. They only glued the top material to the inside of the front bow. I'm sure once glued as ERA described , I will not have another problem with the top. I think I now know part of the search was spell check said convertible not convertabl,e.

Michael C Henry 07-04-2024 12:34 PM
Yes, Thank you, That is exactly what I couldn't bring back up. I copied everything. My new Top was made by an outfit in West Seatle. They apparently do not do Cobra replicas very often. I had the EM hardware in a box. They only glued the top material to the inside of the front bow. I'm sure once glued as ERA described, I will not have another problem with the top. I think I now know part of the search was spell check said convertible not conversable.

NROTOXIN 07-05-2024 05:22 PM
From my other post, if you go to all of YOUR post and scroll to the known timeframes, you will find it regardless of the word used or the spelling/misspelling of your advaced search.


All times are GMT -7. The time now is 08:17 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: