|
Unique rear spring rate
I'm replacing the rear coil overs on my Unique 427SC. Which springs should I get? I'm looking for a firm, but not rigid ride. The shocks are Konis.
Rich |
So...125 lb spring per shock? 150? 200? There's 2 shocks per side.
Rich |
Rich, I just replaced the springs on a Unique that I had. It was suggested I use a 170lb spring for all 4 shocks but this was far too light. I wound up with 225's and they worked good. The adjustment was over half way up so I think I could have gone with a 250 and been ok. Hope this helps.
Don |
Don, thanks for the help!
Rich |
| All times are GMT -7. The time now is 09:38 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: