-
Shop Talk
(
http://www.clubcobra.com/forums/shop-talk/)
| cobrasc1966 |
08-09-2024 12:29 PM |
coil over control arms
All of the 1" narrower tubular control arms I've seen are for coil spring / shock setups. Anyone know a source for the coil over tubular arms that are 1" narrower? Or has anyone converted the coil spring / shock control arms to coil overs? Currently has Aldan coil overs. Car is an NAF Cobra with Mustang II front suspension, 429 SCJ engine, Toploader 4 Speed. Thanks.
|
| MaSnaka |
08-16-2024 12:23 PM |
Check Heits control arms for the Mustang II suspension. You should be able to find what you are looking for. There is a lower arm that eliminates the need for the diagonal strut rods. I chose to keep the strut rods.
John
|
| All times are GMT -7. The time now is 01:48 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
