|
17" Triglo Pin Drive Wheels
Do Triglo make a 17" version of there Halibrand Pin drive wheels.
I checked there website and only seems to be the 15" , but i have seen pictures of a few SPF cars with 17`s fitted. thanks |
yes they do. I know a couple who have them on their spf cars. Also PS Engineering makes them.
|
Are these new from Trigo? I'm pretty sure all the 17's on SPFs are from PS Engineering. Last spring I called Trigo about making 17's for my SPF and they weren't planning on anything in the near future. PSE makes 17's to bolt directly on Trigo hub adapters, so that may be what you are seeing. PSE also can make 15 inch wheels that work with Trigo or other adapters, or even bolt on. If Trigo is now into 17's, that would be pretty cool, as competition might be good for price and quality.
Mike |
Wheel Availability
Trigo was (over a year ago) in the final stage of bringing to market their own 15" FIA style wheel. Does anyone know if they have been released yet? I believe that currently PS Engineering has the market cornered on these.
Rick |
I am not aware of Trigo making 17 inchers. Here's a picture of PS
Engineering wheels:) |
I'll try one last time
Sorry! For some reason the jpeg image will not load |
In the U.K., Image makes a nice looking Halibrand style wheel in virtually any diameter, width, bolt pattern, and backspacing you want. Was almost going to get a set when Team III came out with their 17"ers. Check europaspares.com or cobraspares.com
|
PSE's 17" wheels:
http://www.erareplicas.com/427/pswheelf.jpg and http://www.erareplicas.com/427/pswheelr.jpg |
Hi Bob,
What widths are those rims and what size tyres? I like the look of the 17s and plan to run them on my car. Cheers |
Mike,
In the front are 275-40-17s on 9.5" wide rims, 335-35-17s on 11.5" rims on the rear. Very tight, but no rubbing on our later cars. |
I can attest to the quality and fit of the PSE 17" wheels. I bought a set for my Shell Valley, and they are great. They use the Trigo adapters, which are excellent. One caveat, though: be sure to get the pin alignment tool for initial installation, or they will be a bi**h to install.
BigMike |
Good Morning!
I think SPF manufactures their own wheels, that my include a 17". Dominik |
| All times are GMT -7. The time now is 08:48 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: