Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Shop Talk (http://www.clubcobra.com/forums/shop-talk/)
-   -   Anyone used a Gennie handbrake? (http://www.clubcobra.com/forums/shop-talk/15526-anyone-used-gennie-handbrake.html)

Whaler 03-19-2002 12:31 AM

Anyone used a Gennie handbrake?
 
My builder referred me to this manufacturer...any feedback?
I don't have the e-brake handle yet or even the bracketry to mount one.

gennie

I take it I would want the 16" model??

Tim

Roscoe 03-19-2002 08:21 AM

Whaler,
I've got a brand new chrome 16" brake handle for sale at $ 50.00
Let me know. I've got pics if you need.
Roscoe

Whaler 03-19-2002 11:01 AM

roscoe you've got mail

Tim

Tony Ripepi 03-19-2002 12:34 PM

Hello Whaler,

I used the Gennie cables to the two emergency brake calipers on the Jag rear end of my Unique. I used the handle from Finishline with its existing bracket.

Works great....

Tony R.

PNJSNAK 03-21-2002 07:50 AM

Brake Handle and cables!
I used the Lokar unit and cables. It mounted easily and looks great, a bit pricy but what isn't in this industry of kit cars and hot rods.
Jim

wicked fast 03-21-2002 08:15 AM

Roscoe
 
How about a pic of the brake handle ????

:D

Whaler 03-21-2002 10:57 AM

Jim
 
Did you use the floor/side mount model or the trans mount model??

I will try to post pics of both



http://www.tbuckets.com/category_pic...emer_brake.jpg http://www.tbuckets.com/category_pic...emer_brake.jpg

Lokar goodies

Tony Ripepi 03-21-2002 11:49 AM

The handle from Enzo looks like the side mount. I mounted it to the tunnel on the passenger side, it comes with a U braket that works fine.

TR

PNJSNAK 03-21-2002 01:04 PM

Whaler: I used the floor mounted unit, they also sell a nice boot and ring for the handle. Their cables for it are also very nice. Heavy steel sleeve in a plastic cover with the wound stainless steel wire cable. One only needs to cut to length, lubricate and install.
Jim

Whaler 03-22-2002 06:48 PM

Jim
You used the Gennie floor job?
Was it easy to mount?
For the boot and ring it is additionally charged correct?
Where did you mount it exactly. Tunnel top or Floor
Good to hear the feedback

gomersdad 03-22-2002 06:56 PM

Whaler I just installed a new handle from a Feiro still avalible from GM works great, even when on handle goes down.

PNJSNAK 03-24-2002 09:16 PM

Whaler: I used the Floor mounted unit from Lokar. The boot and ring are extra, like all stuff for these cars. I mounted it on top of the tunnel between the seats alittle towards the passenger side.
Not very difficult at all. Hope this helps. Check out Lokar at lokar.com.
Jim


All times are GMT -7. The time now is 03:31 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: