|
Help..AN4 adapter for Tilton cylinders
I can't find the catalog or article that showed this part.
It was a billet adapter that replaced the plastic adapter on the Tilton master cylinders for the remote mount reservoir. I am using the Girling reservoirs from Cobra Restorers and want to run a #4 s/s braided line between the cylinder and reservoir. Anybody else seen this part ??? Cheer, Bill Cook :D |
help..again
any ideas ???
Cheers, Bill Cook |
I've never seen one, and I'd have my doubts about how reliable the O-ring seal would be. How about running a -5 or -6 (I forget which) off the nipple, with a clamp? Earls makes a fake nipple with the clamp semi-hidden inside.
|
I have seen something similar, but the owner had just cut the nipple off the Tilton head, and installed a bulkhead fitting thru the plastic cap and added ring sealant. He said there were no problems, and that the seal was airtight after he installed the hot seal. Shouldn't be a problem, as the top of the master cylinder doesn't get put under pressure.
|
427sharpe
Great idea.
Will give it a go!!! Cheers, Bill Cook :D |
Please share results
Bill, I have the same 4AN fitting on the remotes and want to install flex lines between the remotes and master cylinders. Please post your results (with pics). Thanks
|
| All times are GMT -7. The time now is 11:40 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: