|
Oxygen Sensor
I am going to do some experimenting with intake systems on my 351 Cleveland and I am installing oxygen sensor bungs in my sidepipe collectors for an Edelbrock Air/Fuel Meter. I can only read one side at a time. Does anyone know where I can find a plug for the unused port? It is a 18mm X 1.5 thread. Has anyone tried one of these Edelbrock Meters? Later, David.
|
If you have the room just screw an old spark plug from a 289, early 302 or 390 in the hole. The thread size and pitch is the same. Plugs are available from any of the aftermarket EFI companies.
HTH, Mike |
For long-term troubleshooting, I would install a second sensor with redundant wiring and a crossover switch. Nice to find bad injectors, intake manifold leaks, or just play. :rolleyes:
But I'm weird.:3DSMILE: |
I know this is answering my own question but I went by parts store today and on a whim, I checked out the replacement drain plugs. Sure enough, I found drain plugs in 18mm X 1.5 size. They fit and worked perfectly in the Oxygen sensor bungs. Another problem solved! Later, David.
|
Forget the oxy sensor, the best way to know what's happening in the combustion chamber is with exhaust gas temp probes an all cylinders' exhaust primaries. EGT in anaheim CA makes great components for just that.
|
Mr.Fixit:
Could you provide some general advice on EGT as a tuning aid? I've heard this is a great way to know what's going on but exactly what do you look for? Are you trying to tune to obtain maximum EGT (or does this mean your timing is too retarded?) And I would suspect the values would differ between different engines and set-ups. I have a 10 channel monitor (it was free) that I will be using on a turbocharged 2.3 but not exactly clear on what is a good temp and what is bad. Thanks, Francis P.S. What brand of O2 sensor does anyone recommend..and why |
| All times are GMT -7. The time now is 04:33 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: