-
Shop Talk
(
http://www.clubcobra.com/forums/shop-talk/)
| OhBuoy |
07-06-2002 04:42 AM |
Fuel Sender installation
I just got my new fuel sender for my B&B kit. The guage has instructions, but nothing for the sender. It has a straight metal rod that is too long to fit in the tank. Do I move the float and cut the rod? Do I bend the rod?
|
| PNJSNAK |
07-06-2002 07:51 AM |
OhBouy: What fuel sender do you have. If it is a VDO unit I can fax you the instruction sheets. Typically the length of the float arm varies with the depth of the tank and the length of the sender unit. After you set the unit to the correct length you cut off the excess and make sure the float arm is in the right direction or your gage will show empty when full and visaversa.
Jim
|
| All times are GMT -7. The time now is 06:05 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
