Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Shop Talk (http://www.clubcobra.com/forums/shop-talk/)
-   -   PCV Routing (http://www.clubcobra.com/forums/shop-talk/18477-pcv-routing.html)

OhBuoy 07-07-2002 07:02 AM

PCV Routing
 
I have the following setup...

302 engine rebuilt

Cobra Valve Covers (Passengers side has a round hole with ears that accepts a standard oil cap, Drivers side has a tall tupe with a breather cap on it. I just purchased a breather cap with a nipple on it for a PCV setup.

Edelbrock Performer RPM intake.

Holley 600 Carb.

Cobra oval air cleaner.

What is the best way for me to route my PCV setup?

Thanks for the help,
Tom

Bob In Ct 07-07-2002 08:37 AM

Hey Tom:
Do not route the PCV hose to the manifold! It should go to the PCV port on the carb (if it has one). If you connect it incorrectly it will lean out the mixture. I'm going through the same question with my 80508 Holley.

Bob

Whaler 07-07-2002 09:58 AM

You should always do a search first, then ask.......
I have found that we have all been there or done that and believe it or not most every question has been asked. Anyhow that was my same question 2 weeks ago......lol :)

http://www.clubcobra.com/forums/show...=dumb+question

Tim

Jack21 07-07-2002 10:05 AM

Once again...

There should be a 3/8" hose fitting on the front or rear of the carb base plate. The PVC is hooked up there,

If there's another vacuum port on one of the intake manifold runners, it's for the power brakes.


All times are GMT -7. The time now is 04:39 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: