|
Holley refurb...
Has anyone used the Holley Custom Shop (in Tenn.?) for refurbishing old carbs?
Seems like the right place for a job like this; I need to do a total restoration on an old Holley 4-bbl, both mechanical and cosmetic. If not, any other leads or suggestions? |
Yes
Ron,
Fred Dieker sent his Holley Carbs to the factory rebuilding site and they came back looking like new and seem to work perfectly. Cranky:) |
I did,
Ron,
I sent my 4160s to the factory. They take their time, and very expensive. I think they end up at their Custom Shop. They came back looking like brandnew. If you ask for restoration, they keep it looking like original reluctant to replace any of the screws and hardware. They do one heck of a job. Cost about a year ago, $708.92 for a pair. They will return all the parts they replaced etc. They took a long time. If you have the carbs send them well ahead of the engine building. Holley Performance Products 509 Industrial Dr. Springfield, TN 37172 Attention Custom Shop. 502-782-2900 TURK |
You just need to completely disassemble the carbs, dip them in carb cleaner, glass bead blast every little piece, send the steel screws out to be plated, chromate dip the aluminum parts, then put it all back together with new gaskets and such. I used to charge $600 to do a set of three two barrel holleys.
|
| All times are GMT -7. The time now is 04:47 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: