Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Shop Talk (http://www.clubcobra.com/forums/shop-talk/)
-   -   dashboard for cr (http://www.clubcobra.com/forums/shop-talk/18709-dashboard-cr.html)

dcapo 07-16-2002 08:02 AM
dashboard for cr
 
I CUT ALL HOLES IN MY STANDARD DASH FOR MY CR NEED HELP WITH INSTALL OF GLOVE BOX . MANUAL DOSE NOT HELP. THANKS --DCAPO

dscott 07-16-2002 08:11 AM
Dcapo, Cut the hole for the glovebox but leave a lip for the box to attach. The glovebox slides in from the front and attaches to the lip with screws or rivets. The door is in 3 pieces, the plastic cover gets the vinyl glued to it, that piece is then glued to the metal cover. The door assy. is then attached to the inside lower lip of the box. Make sure you leave enough room for the cover to clear the upper part of the opening. You may also have to do some trimming of the metal door to get the plastic cover to fit properly. I usually assemble the entire box before I install it in the dash.
Don

dcapo 07-16-2002 08:16 AM
DON --THANKS VERY MUCH BUT I NEAVER RECIVED A METAL DOOR ONLY BOX AND PLASTIC COVER WHAT WOULD BE EASY WAY TO MAKE ONE. THANKS --DCAPO

dscott 07-16-2002 11:00 AM
There is no easy way to make one. Check all your boxes, the cover usually comes with the metal parts box (door hinges, latches, etc). The piano style hinge is welded to the cover and the shape is the same as the plastic cover. Give Pete @ Classic a call and tell him you need one if you can't find it. 1-800-373-9000.
Don


All times are GMT -7. The time now is 12:19 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: