|
Gas pedal ???'s
I have tried a Mustang II pedal and a 1970 Mustang Pedal in my EM.
Neither seem to fit quite right. Seems like the angle of the linkage goes too far toward the outside of the car with both pedals. I am afraid this will interfer with my brake pedal assembly when I go to put it in. I guess I might bend the 1970 linkage back toward the steering column some ??? ... but this still throws the pedal into a slight lateral movement when pushed down. I bought a Lokar 36"HT cable to install, but I think I need to find something better as far as the pedal goes... any suggestions? Thanks. RZ |
Check out the "Consumer Watch" forum. There is a thread on EM.
Call Enzo. Jerry |
The easiet way is to get a "moon style" gas pedal assy and cable. Just bolt it to the floor, make a pedal stop and bracket for the carb.
|
Thanks for the input guys.
I am looking for a pedal assembly that is readily available. (translated: inexpensive) The problems I am running into is the pedal rods are normally "S" shaped and take up too much space, not to mention the footbox in the EM is pretty deep, to mount one down there, puts the brake pedal about 6 " back towards my knees. ????? Is it unusual to use a block or spacer to mount a Gas pedal to the front of the foot box???? :CRY: RZ |
Gas Pedal
Ron,
I have seen and set behind an EM and I will tell you that my gas pedal sets a good 4" behind my brake and clutch pedals not to much different than the EM. I have never found that to be a problem. My floor pan is fairly deep as well. When I am on the interstate I just slid my foot under the pedals if I am crusing. As far as an acceptable gas pedal there are several out there that will work just fine priced from $30 up to $100+. To answer your other questions regarding a spacer block to put your gas pedal farther away from your firewall, well I just haven't seen anyone do that yet...but you know Ford has the adjustable pedals in several of their new models now. Clois |
| All times are GMT -7. The time now is 07:38 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: