|
shoulder harness to roll bar
am looking for the brackets that attach to the roll bar that the seat belt/shoulder harness attaches to. have seen them on many cars and looked in many catalogs but can't find them. any help ?
thanks jerry |
Roll Bar Harness Mount
I bought mine from Enzo at Finish Line. But since I have a B&B Mfg kit and my roll bar is a little wider than the average Cobra (15 1/2" wide center to center) I used Enzo's mounting hardware and made me a cross bar from 3/4" thich wall round steel. I made two tabs about 2" wide and 1/4" thick and positioned them on either side of my shoulders and welded them to the bar. I also drilled 1/2" holes in my tabs for mounting my shoulder straps. I may have them all chromed some day but for now I just painted them semi-gloss black and everything looks great and works even better. When I first mounted my shoulder straps I mounted them behind the seat my shoulder straps would slide off my shoulders in hard turns.
If your roll bar is 141/2" wide or less Enzo has a perfect set-up for you made with a stainless steel cross bar. If yours is like mine the modification is simple and works extremely well. Good luck and happy racing. Clois Harlan |
Clois (and anyone else),
I've noticed that some people have their shoulder-harnesses anchored to the floor---with some applications routed through the seat-back, via holes for that purpose. Others I see are anchored on a cross-bar affixed to the roll-bar itself. Therefore one type comes almost from the floor level, well below the driver's shoulders, and the other type comes from the roll-bar, straight across. Which do you prefer? |
| All times are GMT -7. The time now is 09:26 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: