|
Quick Brake MC question
I have a tandem system brake MC. Its floor mounted with 2- 4 oz.remote reservoirs.
I received no info or manufacturer name with it when I got my half built roller. Is the front most port to go to the front or back and ditto for the rear most port on the MC?? Thx Tim It looks like this configuration, except it has remote reservoirs which are both equally sized. http://www.speedwaymotors.com/produc...22UGKV0PBUB9ED |
Seeing as how I recieved no response to my question on my brake MC I thought I would post what a wilwood tech gave me today.......
"The port closest to the mounting flange has more volume, this would go the front brakes" Now we all know cheers Tim |
Right on Tim. Be sure to put a coil in the lines just below the MC when you install. Helps with air in the lines. You can and should also bleed the MC/reservoir line before hooking it up to the main brake lines.
Al |
Hi Al
Thanks for the response I have the floor mounted pedals and MC. Because we are already down at the fllors frame there is not the greatest room for much except a very tight radius loop or loops. Do you mean a single loop on the vertical plain at each port? I will be mounting 2- 2# residual valves as well. I always thought that the loop/s were for vibration sake? How does the loop help out in the air aspect? I am in the process of retubing the MC with emphasis on getting a firm pedal. Thanks for the input Tim |
|
| All times are GMT -7. The time now is 05:53 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: