|
Moving to 5 speed: NO pedal room!
I have an older NAF Cobra with an automatic. I would like to changeover to a 5 speed, but the foot box is extremely tight. I have a Tilton pedal and brake system mounted on the firewall, with a conventional, small gas pedal. The horizontal clearance is so tight already that I have to tuck my left foot way back to hit the brakes. Any suggestions on a brake and clutch assembly that is engineered for tight fits? Tilton has some options, but they all look to be sized fairly standard. My other option is to modify the size of the footbox (MPITA)...
|
chop off a few toes and wear womens shoes :D
I have a Hunter Cobra and am using the Wilwood three master cylinder dual pedal setup. There is no room for wide shoes so cross trainers are out. The wilwood dual pedal setup has the correct spacing on the pedals so you need to start from the left and work out the gas pedal as far to the right as you can. Does your cobra have a inner liner on the left side of the foot box? If so you might be able to remove part of it and open up a little more room for your clutch pedal. Many cobras have just the outside of the body for the inside of the footbox. My cobra has a thin piece of plywood covered in black vinyl and I have thought about cutting off the part next to the clutch pedal and gluing carpet to the inside of the body/footbox. Cobras are not made for people with big feet or bodies. |
I have a B & B and had the same issue, plus size 13 feet. By removing the panel next to the clutch, making the pedals smaller,
and heating the pedal arms to move them back & forth I made it work. Jay |
| All times are GMT -7. The time now is 07:52 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: