-
Shop Talk
(
http://www.clubcobra.com/forums/shop-talk/)
| jdeuel87 |
12-11-2002 05:03 PM |
? attahing wire loom
Any suggestions on clips/bonding material that I would use to attach round plastic wiring loom to fiberglass portion of engine bay/cockpit...I plan to run the loom along the side of the hood and along the door area and will not be able to rivit to these areas...THANKS
|
| Mr.Fixit |
12-11-2002 05:55 PM |
Use the same clips as for rivet, but though bolt them into place. Or use the adhesive tabs made for attaching nylon Zip-ties though. Some manufacturers even silicone the loom into it's home.
|
| All times are GMT -7. The time now is 02:14 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
