|
Lucas switches
Started to wire the car last week and everything went well till I opened the boxes containing the switches. They are the Lucas style from Finishline. I have 5 switches and 3 have the round chrome outer retainer ring/nut and 2 have just the hex style nut. Is this a common thing or am I missing the round retainers. Looks really bad with mixture. I called Finish line to order a 3 position switch for my heater and told them this and they weren't sure what problem was. I asked if they had any laying around to send them, but when package arrived, just my switch that I ordered and guess what? This switch has hex nut and no round outer retainer ring. What's a fella to do?
exrodder |
To my knowledge, all Lucas switches used on Cobras have a chrome outer bezel.
The 2 and 3 position toggle switches have an outer bezel and lock washer, while the wiper, dimmer (both rotary), and ignition switches have a chrome outer bezel, lock washer and a brass hex nut the inside of the dash that is used to tighten up the switch to prevent its turning in the dash hole. If for some reason you don't have them, I am sure Paula will rectify the problem. Good Luck. Bud |
1 Attachment(s)
exRodder,
I just checked my switches. I got some from Finishline and some directly from England. I have 2 with the "hex" bezel nut, both are 3 position (one for my turn signals and the other is my light switch. The two position switches all have the round bezel nut. The wiper switch (also a toggle style) has a round bezel nut. I arranged the two with the hex opposite of each other on either side of the tach at top and the others in a row along the bottom. (see the picture). The wiring can be tricky for some of the switches. (lights & wiper) drop me a line if you have questions on how to wire these guys up. good luck, Mike 'monster' |
Yes, the mixture is normal and correct. (from what I have seen, no historian here!)
|
Thaks for the input and information. I just wanted to have all the switches with the same round bezel. Sounds like I have to order 3 of the single position switches to get the round bezels to finish the dash. Seems like a high price to pay, but I don't like the look of the mixed round and hex bezels.
|
You guys know why the Brits drink warm beer ????
Lucas makes refrigerators also. |
ex rodder, those" ring nuts" are standard stuff .if your local napa guy dosnt have them i'd be surprized . g luck
|
| All times are GMT -7. The time now is 08:49 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: