|
2x4 holly i.d.,i have #'s help!!
well you guys convinced me its time to rebuild, what with gas all over the place and everything. its a stock setup from 1965 but i seem to have a few too many numbers,im hoping someone recocnizes a couple. so here goes.....onthe back of the main throttle bodies:C3AE 9510-C just under that LIST 2652-1
in faint ink: 2652 any guesses ... thanks , Karl |
2652-1 is a 4160 Holley Number 1963/64 Ford & Mercury 2-4 Bbl Installed on 406's and 427's.
Regards, george If you need complete illustrated parts (Typical views)and spec sheets I could scan my information an email it to you. (Ref Page 28 Holley Manual for all Holley Carburetor Model Part No. 36-51-7 Weatherly Index 600, copyright 1989 Colt Industries-was Holley Replacement Parts Division) |
thanks george,what does 2652-1 mean? i couldnt find it anywhere on the holley websight.is this # specific to my rebuilds?
If these are 4160 carbs does that mean they are 660 cfm's? isnt 1320 cfm's a lot for a stock 427? |
2652-1 is just a listing "LIST" number for the specific characteristics of this 4160 style Carb. If you look for R-2652-1 or 1A you may find current parts available for this Carb. The book mentioned above describes the components, rebuild kits, jet sizes etc. for this specific List Number from Holley. This number may not be listed currently in the service numbers in the Holley Catalog....but the internal parts are still avavilable and would be similar to other 4160's which is the style that will fit the Ford 2X4 manifolds....I didn't look close enough at the description to notice the CFM...but probably 550...but that's just a guess as I didn't really look into the number more than just the description I mentioned above.
George |
This page will give you the information you're looking for.
http://www.gessford.com/work/images/holley_info.htm George |
George ,thanks for the link to my carb info. i can see from your website you are a pretty busy guy.hats off. i have my kits in hand and a carb in the bath, still cant find any one who can tell me the rated cfm of these two,i suppose it dosn't matter exept for bs.
Karl |
I think they are 600 cfm.
|
thanks capn. are you running 2652's ?
|
| All times are GMT -7. The time now is 03:55 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: