|
Throwout fork part #??
I am installing a scattershield on my 351W and I want to change the throwout fork from the late model style with the ball mount on the end of the fork to the older style which pivots on the angle bracket.
The scattershield will accept both types but I had a problem with the late model type in that the clutch(Centerforce dual friction) was barely releasing even though Iwas getting full travel from the slave. I just need the Ford part number for the fork. Thanks, Cranky |
Try these:
C80Z-7515-A - Small spline C80Z-7515-D - Big spline I don't remember if you have a toploader or Tremec, but I think the small spline one works for the Tremec. I might be wrong. Maybe someone can verify that. |
Thanks Dave, I'll go see the local Ford dealer this week.
BTW Tremec Cranky:3DSMILE: |
Getting the ball stud adjusted just right can make all the difference if your slave doesn't have any extra travel. Also, making a perfect length slave pushrod is sometimes necessary, so you won't waste any piston movement at all.
|
Mr. Fixit,
It seems like the ratio on slave to bearing is higher with the older type and offers more room for adjustment. I have considered keeping the ball type. No desicions yet. Thanks for the help. Cranky:D |
| All times are GMT -7. The time now is 10:55 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: