Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Shop Talk (http://www.clubcobra.com/forums/shop-talk/)
-   -   awd cobra (http://www.clubcobra.com/forums/shop-talk/38918-awd-cobra.html)

orangeconv 02-22-2003 08:41 AM

awd cobra
 
:D any one have the idea of converting there cobra to a all wheel drive version? is there one out there?

Aussie Mike 02-22-2003 10:34 PM

OZVENOM, Are you listening?
 
One of our Aussie brethren OZVENOM is building one as we speak. Running gear is Nissan GTR Skyline from memory. Powerplant is a twin turbo Lexus V8. Should be an awesome machine when it's finished.

OZVENOM will be able to tell you more about it.

OZVENOM 02-23-2003 02:25 AM

the beast
 
Hi orange,
Yes its coming along slowly i have the cob regoed now and have just finished the 6 point cage. Next is install m48 pro motec then the turbos go on after that , then when its all running nice i will change the gear box for the awd and mount the diff hookup the drive shafts and away we go .
sounds easy well not quite but its coming along .
i am going to race it for 8 months then do the conversion gotta have some fun in it it took 9 months to build .
Mike how is yours coming along ???
Craigs now has engine and trans in most plumbing is hooked up
hope to have it running in the next couple of weeks.
regards scott.

750hp 02-23-2003 06:01 AM

Scott - I was wondering how long it would take for you to jump in on this thread..... ;)
Next couple of weeks.... why don't we enter it in the race meeting at Qld Raceway next weekend!!! ;) **) :3DSMILE:

Orange - You have to see Scott at work to fully understand & appreciate what he's capable of. He's building my car at the moment. While it takes me 30 minutes to measure and figure out how I'm going to do something to the car, he's already got in beside me and measured, fabricated and fitted it before I've even had a chance to work out how to make it in the first place... %/

mattr762 11-12-2003 08:46 AM

*Bump!*

I'd like to hear an update on the AWD Cobra. With pictures please!

Thanks!

Aussie Mike 11-12-2003 04:23 PM

Hi Matt,

Scott's car is on the road and was an awesome site to see at the nationals. It's running a large single Turbo and is extremely quick. Scott took me for a spin up the road and when that boost comes in, look out! He hasn't got the front diff and gearbox in yet but knowing Scott it'll happen bofore too long.

There are a bunch of pictures in Scott's Gallery.
http://www.clubcobra.com/photopost/d..._cobra-med.jpg

Tinker51 11-12-2003 05:45 PM

Not a Cobra but...
 
A friend had a video about a guy who took the driveline out of a World Ralley car and put it into a VW Golf. The video was in German but it was about a 15 minute piece about the car. My German is not what it used to be and my conversions may not be accurate but it sounded like an AWD Golf with approx 900hp. There was a bunch of in car and exterior footage of this thing going around a track and it was awsome to say the least and the pay off is that it also can be driven on the street. How would you like to get stomped in your Cobra by a VW Golf.

mattr762 11-12-2003 06:15 PM

Quote:

He hasn't got the front diff and gearbox in yet but knowing Scott it'll happen bofore too long.
That is my main question, how or where can it fit with that V8 in there? Is there actually room for the front diff?

I was think more in the line of an modded STi drive train to output 400 to the wheels. Much much lighter than a V8 and seems like it would have a lot more room to work with.

Thoughts?

Thanks,
Matt

750hp 11-12-2003 11:22 PM

Matt - while there's no denying the potential of the WRX motor, the extra costs in building / maintaining the transmission means that the V8 option still looks like the way to go (in my opinion).

There are some world class WRX engine builders here in Australia (9.1 seconds @ 148.9mph :eek: ), they are spending big $$$ to get there, and either using autos or high-end straight-cut dog boxes.

Scott OZVENOM is planning on using the Lexus V8, GTR skyline 6 speed trans, GTR rear diff, and Toyota/Lexus front diff. The chassis rails will need a few inches extra clearance, and the steering rack will be converted from rear mount to front mount. The car already has the Nissan AWD front hub/upright assembly fitted. He had a Supra 5 speed trans in the car for our Cobra Nationals - where he ran fastest outright - but has since sheared all of the teeth off third gear. No big surprise, considering the torque of a turbocharged V8... For the time being, a 6 speed Supra Turbo box will be used, and I have a feeling that Scott will sell this car and design / incorporate all necessary AWD components into his new car.


All times are GMT -7. The time now is 02:08 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: