|
Amp Gauge ??
Hello,
I can not seem to get my AMP gauge working. It's a Stewart Warner Gauge Set. I have a CR wiring harness and I am running a HOT wire (POS #130) to the "+" side pole on the back of the AMP Gauge, and then from the Other pole on the back of the gauge I Ran a wire to the PWR in of my fuel gauge.... I thought this would be a good source of constant current pull. The Fuel Gauge works properly with this configuration, but the AMP Gauge needle does not move at all..... What am I doing wrong?? .:CRY: Thanks RZ |
That would work if it was a voltmeter. An ammeter needs to have all the car's current flowing through it (except battery cables) to work, right now yours is just measuring the current draw of the fuel gauge, which is nothing. The 10 awg red wire that connects the fuse panel to the hot side of the starter solenoid (your's may be different, this is a typical setup) this wire needs to be bisected by the ammeter. Voltmeters are safer and easier to install.
|
Fixit, your right about the volt meters, I wish S&W offered a 2 5/8 volt meter.
|
Fixit,
I knew there was something wierd going on. Now, I can correct this problem. Thanks, RZ |
Amp gauge
I'm currently removing a Lucas Amp gauge with the bouncing needle and replacing it with an Autometer Volt gauge. Autometer makes a nice look-a-like 427 gauge package. Picked them up from Rick at HDR.
|
and they make both 427 style and FIA style- so which ever size you are looking for you can get about any guage you want from them, they are fast friendly and look VERY similar. (and as compared to the originals- well they work WAY better)
|
| All times are GMT -7. The time now is 03:25 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: