|
Contemporary front brake help
I have the coil over set up with pin drives. I have Wilwood superlite four pot calipers and wonder if anyone has a six pot set up. Also one of my discs looks to have a hairline stress crack in it and I would like to replace it. Does anyone know where I can get new replacement discs. The ones I have are 11 inch vented I think they are Brembo. Are cross drilled ones available? If you have a coil over set up with a different brake system that you feel really works well I would appreciate the details.
|
If they are stock discs they should be for a Jag XJ series ~11." I may still have a set of unused rotors arround. I ended up developing a 14" brembo rotor setup before I finished the car. Pictures of my new setup should still be on this board.
Gary |
Gary ,
Nice work on the fronts ,I'm still with the series 1, could you provide a couple details of what you did? and does that setup fit behind 15" wheels? thanks Karl |
Details:
- selected light weight Brembo 14" rotor - designed custom aluminium top hat that would locate the rotor in the best spot and fit the XJ bolt pattern, etc. - design and build a custom Cr Moly Steel bracket to locate the caliper in the correct spot relative to the rotor. - upgraded to all aircraft quality hardware to hold on rotor and for caliper and bracket. Will only work on 17" and larger wheels (may for 16" but I doubt it). |
Yet another reason to turn your Trigo's into a coffee table.
|
| All times are GMT -7. The time now is 02:54 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: