|
Trigo wheels or alternative
Are Trigo rims considerred the 'best' for Cobra replicas? I cannot use knock-off here in Switzerland but they seem to have an optional center nut. Any other manufacturers which are recommended?
thanks Ed |
please mail me for more info to put TRIGOs on your Shamrock Cobra.
I have a set in germany and may be able to get you a set of 6 point (sechskant) nuts made in cape town. the shamrock may not have enough space from the wheel hub (jaguar) to the fender. you need about 190 mm from the fender to the disk. measure through the wheel. dom, cape town dominikbuss@web.de |
| All times are GMT -7. The time now is 03:49 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: