|
Tach hook up MSD with Smith Tach
Hey everyone,
I have a Kirkham that has a MSD ignition. How do you hook up the Smith tach? Thanks, Tom Lucas:JEKYLHYDE |
Tom:
There is an MSD adaptor that is usually furnished with the tach, and you need it to do the install. It is a small unit that mounts under your dash. Your tach has three male spade connections, input, output and ground....the adaptor has four - input, output, ignition and ground The MSD module has a recessed spade connector on its side that runs a single wire to the adaptor. Installation is very straightforward, and if you have purchased the Smiths MSD adaptor, the instructions that come with it are very clear. Bud:JEKYLHYDE :JEKYLHYDE :JEKYLHYDE |
It depends, there are two different styles of Smiths tachs I have seen in cobras. One needs the MSD tach adapter, as well as a large discoidal capacitor inline with the tach signal wire. The other type works fine just connecting the tach output lead from the 6AL directly to the tach. Try hooking it up from the tach output on the 6AL directly tothe tach, just you would with any tach. If that doesn't work, get the capacitor free from MSD. If those two don't do it, get the $30 tach adapter box from MSD. Or just call MSD's tech support and deal with them. The second type of Smith's tach referred to here has a single multi-wire connector, the first type has a couple of single wire connectors.
|
Hey Guys;
Thanks for the help!!!! This Sunday, May 4th, at Sacramento Raceway, there is a Ford Swap meet, car show, and Drag race!! There will bew a lot of very fine Fords in attendance, so come out if you can!!! I will be running our 67 Mustang Coupe looking for 10.50s. Tom Lucas |
| All times are GMT -7. The time now is 12:43 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: