|
Possible To Change 2 Piece Main Seal To One?
Perhaps someone might be able to answer two questions; when was the change, on a 351W block, from a two piece crank seal to one piece? Second; can a two piece block be converted to a one piece design, reasonably?
Thank you, auto10x Bill |
Bill,
I think they changed in 1980. No. Poorboy |
You can change a two piece to a one piece, but it should be done when they are line-honing your mains. They cut the back of the block to accept it. There may be an easier way, but that's the way we used to do it. works great. A properly installed two piece seal works fine too.
|
| All times are GMT -7. The time now is 09:30 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: