|
Carpeting questions..how much material?
Hi gang
For those who have been there, how much carpet in sq yrds or what have youi will do the cars cockpit?? My builder also said he uses black trunk felt to do the more tricky compound curve areas ( like the fender caps) He uses lots of sections and some get bound edges if they happen to be the topmost pieces. He uses underlay sparingly so as to not bulk up certain areas. I think only the tunnel top, footbox tops side etc Just basically want to know this amount so I can order an amount with a little extra from an upholstery shop...you know the confident "I need so many sq yards" answer......LOL oh yeah .....he said lots of spray on industrial strength glue. He didn't tell me how much material because he farms this job out to an upholstery shop! Tim |
I just installed a foam/insulation bond to my interior. I did the complete area, floor, foot boxes, trans tunnel and behind the seats with a roll 60" x 120" and had a very small amount left over.
|
Chifo
TY for the response... looks like whatever one uses a roll/piece 5 by 10 ft should cover it What was the material you were using in this application..simple underlay or was it the aluminum backed thermal barrier some speak of? Tim |
Tim,
I would talk directly to the upholstery shop if I were you. Great thread. I'm going to do my Unique's carpet, so this info will be helpfull thanks. Steven :) |
The insulation I used was a closed cell foam with an aluminized thermal barrier bonded to the rear. Its a bit more costly than the pad/aluminized but what I really liked about it is that it will not take on any water due to the closed cell foam. For an open top car this was quite a plus in my mind.
|
Where is this available from?
|
Are you asking about the insulation?
|
Yes. The type with the foam and foil.
Thanks |
You can buy it from Larry Phillips at Prorod. He can be reached at 760/746-5518 or by email at prorod940@aol.com. It should be between $60 and $80 to do your interior complete. A bit more but you wont have mold/mildew problems like with the jute based insulations.
|
Thanks for the reply. I'll give him a call.
|
| All times are GMT -7. The time now is 06:52 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: