|
302 fuel injection conversion
Hi there, I've built a cobra kit car and have installed a 91 302 motor out of a mustang. I tried using the fuel injection system but wasn't quite able to get it to run 100%. I switch it to a carb, but want to convert it back to the fuel injection system. I have the complete wirring harness. I believe my problem lies somewhere in my wirring connections. I've found a site but it refers to a 88 wirring schematic which seems to be a little different then the 91. If anyone has some advice or knowledge, I would greatly appreciate your help. Thanks Ryan.
|
|
Sites for 302 FI conversions?
<< I've found a site but it refers to a 88 wirring schematic >>
Could you provide the web address for the site you mention here. I'm looking for any information I can find to do a conversion myself. I'm looking at using a fuel injected 302 from a 1986 Grand Marquis. I know I'll need things like the fuel pump, O2 sensor, wiring harness and computer, but I would like more information before I start the process. Thanks, Bob |
302 efi conversion
The 88 wire harness does not include the wiring for mass air. It will work but you'll need the mass air wire conversion. You can purchase the kit from summit....for only about 25.00....
|
Here's a site with the info you're looking for - Mustang Wiring Diagrams
EDIT: Just noticed the Q was asked back in June :o |
Kinda off the subject, I know, but I've got a related question.....Ok, I'm building an engine for my Mustang, and found a Cobra motor to put in it and figured I would just finish it out with all Cobra electronics. The only problem is, I need a mass air meter. I wanted to find one at a parts house thats been remanufactured, but I don't know the Ford part number for the Cobra mass air. Any suggestions?
|
| All times are GMT -7. The time now is 02:22 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: