|
2x4 tube frame
guys I need some help locating blueprints to build my own
frame. I have done searches any where and everywhere with no luck. Looking for a 2x4 frame set up for an FE motor. What I need are the dimenions for the kick ups,motor set back from center of ball joints to #1 plug,frame width and numbers for the outriggers. I bought 6 SO blocks with one being a complete stroker and another being a short block. Even though they look good in the garage its time to build a complete roller. If any body is in the St. Louis Mo. area and wouldn't mind me taking a tape measure to their frame I would like to hear from you. I can be contacted at tnlprt@aol.com Thank You all Joe |
| All times are GMT -7. The time now is 02:09 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: