|
slow cobra
My cobra barely can spin tire in 1st gear. The o2 sensors are reading low voltage but are brand new and the maf has been replaced. I've been fighting with a rough idle for 3 years. My cobra is a 1994 cobra with everything stock and high mileage. If anyone has had similar trouble that they have been able to correct, please let me know. After cutting back the wire loom on my harness to see if it's a bad wire, I found that the egr has no vaccuum. Could this be my problem?
|
I wish I could help but I can't. As soon as I got my 302 I pulled all the FI stuff off and carburated it.
Much easier to work on and make go fast! Good Luck! Clois |
| All times are GMT -7. The time now is 10:43 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: