|
wiring connectors
I'm trying to find wiring connectors for Lucas Style tail lights and front parking lights. They are called Loose Bullet Sleeves. They are approx. 5mm, made of Brass or Copper. They are slightly tapered so they friction fit into the wiring connector on the light assembly. I've searched all over town, on the internet, and called a supplier in Chicago. No one can find them. If anyone knows where to get them please let me know. Thanks
|
Did you try ERA or Finish Line?
|
If Enzo doesn't have them, try Moss Motors
|
Thank you. I'll try them both.
|
MOSS MOTORS OR VICTORIA BRITISH WILL HAVE THEM IN STOCK AND WILL SHIP OVERNIGHT IF REQUESTED. BOTH HAVE WEBSITES
HOWARD |
I wouldn't use a stock Lucas anything.
Convert wiring ends to standard two or three prong connectors, solder and grease them for corrosion protection. The stock Lucas ground wire connection on parking, turn, tail lights are just begging for corrosion problems. Disconnect them, straighten out the lamp lead, drill a hole in it, then use a soldered and greased connector to hold it in place with a stainless or brass screw and nut about an 8-32 or 10-32. Those little brass fittings that the lens screws go into will cause dissimilar metals corrosion if not protected. Wheelbearing grease, or ignition wire silicone grease will prevent this. |
| All times are GMT -7. The time now is 08:38 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: