|
Source for custom suspension pieces?
Midway through a Griffith 400 "restoration", and looking for a shop that will custom build upper and lower front and rear control arms, front uprights, rear hubs,... It's receiving an all aluminum 427 smallblock and the original '60's vintage suspension bits do not fit the bill. Thanks.
RRD |
Are you duplicating the stock parts? Stock geometry?I would recomend a switch to real suspension components .We are building a "Frankenstine" TVR/Griffith also. Send me your specs, I'll get you a quote.
|
| All times are GMT -7. The time now is 09:16 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: