|
Trularin,
Great advice. I would only ad that you don't need to remove the valve cover. 1. Remove the spark plugs from the engine. 2. place your finger over the #1 spark plug hole 3. have friend turn engine in normal direction of rotation with a wrench until you feel pressure in the cyl with your finger. = compression stroke. Steve |
See new topic, "...and the winner is" for resolution here. For Archives, marks were 180 away from large hash mark under surface rust, balancer was good.
Steve |
If this was my engine I would drop the oil pan or pull a head and dial the engine in using a dial indicator. Engines cost alot of money to build and alot more if you break it because of a check you did not do.
my thoughts |
| All times are GMT -7. The time now is 04:00 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: