Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Shop Talk (http://www.clubcobra.com/forums/shop-talk/)
-   -   Motorcraft Filter Question (http://www.clubcobra.com/forums/shop-talk/47614-motorcraft-filter-question.html)

Chaplin 11-27-2003 08:45 AM

Motorcraft Filter Question
 
Does anybody know the difference between the FL1 and FL1A filters? I can't seem to find an FL1 locally, but everyone seems to have the FL1A in stock.

And Happy Thanksgiving!

Rob_R 11-27-2003 10:07 AM

I am not sure of the difference between a FL-1 and a FL-1A. I would suggest that you use a Motorcraft FL-1HP which is supposed to be a higher flowing filter with a stronger case compared to the FL-1 or 1A. This filter has a 400 PSI burst rating.

An equivalent to the FL-1HP is a Wix Racing filter 51515R. The Wix box warns that the filter is not intended for street use. The reason for this warning is because there is no bypass if the filter should clog. The burst pressure on the Wix is 500 PSI. You can get the Wix at local auto parts stores and NAPA. The NAPA version of the Wix 51515R has some Michael Waltrip graphics on it that may not be too appealing under a Cobra hood. I have used both the Wix 51515R and the Motorcraft FL-1HP with no ill effects.

I do not know the micron filter rating for any of these filters.

Wix has the common decency put the filter in a sealed bag inside of the box. Ford does not.

Robert

427sharpe 11-27-2003 04:24 PM

The FL1 had no anti drain back valve, the FL1A does. The FL1 was
discontinued in the early 70's, replaced by the FL1A.

Don 11-27-2003 04:40 PM

Oil Filter Study
 
Might help in answering questions regarding the various oil filters;

http://minimopar.net/oilfilterstudy.html


All times are GMT -7. The time now is 04:22 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: