|
Engine builder in/near Los Angeles?
I'm looking for a good shop near LA to take a look at my engine. I just picked up my new-to-me coupe. The previous owner had it dynoed and it made 300 peak rwhp. The way it is built i would expect much more so i would just like to find someone good to take a look at it.
By the way, if you're curious here are the specs on the motor: 351W/300HP at the wheels with brand new pistons, rings, bearings, balanced 9.5:1 Competition roller cam. Trick Flow heads and valve covers MSD Pro Billet Distributor and wires Holley Avenger carburetor FMS Headers into Flowmaster mufflers. HP6 remote filter and oil cooler all with braided lines throughout. March billet pulleys and polished alternator Dual NASCAR MSD 6al ignition boxes with switching unit. |
If it is not to far from you I used Ford Performance in Ananheim..
They did a great job for me. 377 cu 485 tq and 545 hp on pumped gas. Their number is 714-773-4177 ask for Troy. David:JEKYLHYDE |
If you're in the L.A. area I recommend Steve Beck at Checkpoint Automotive (310) 391-9774. Located in Culver City, Steve is the best. Make sure you mention my name.
Good luck Shin |
i called steve @ checkpoint and he says 300whp sounds good. i don't know why but it sounded kind of low to me. i guess i won't worry about it.
|
A 351W pumping out 300 RWHP through the air cleaner, through the mufflers, with a flat tappet hydraulic cam is nothing to be ashamed of. My 351W with air cleaner off and a CompCams hydraulic roller was putting out 325 RWHP, would like more but am not unhappy with performance.
Put a stroker kit in it, better heads and headers, and a hydraulic roller and your wishes should be fulfilled. This months Muscle Mustang & Fast Fords dynos a variety of 393W motors putting out 525 HP at the flywheel. Check it out. |
i don't really need more power right now, i just wanted it to be tuned optimally. The car is wicked fast as is. Maybe eventually i'll try to get it up to about 350hp but this is a road racing/autocross car so any more would be tough to handle.
-Steve |
| All times are GMT -7. The time now is 12:41 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: