|
Hey Brent. Common mistakes thread?
All of us have made mistakes that the rest of us can learn from without reaping them.
What I propose is a thread which lists these mistakes along with a link to existing threads that discuss how to prevent them. I will kick things off with the old lose knock off issue. http://www.clubcobra.com/forums/show...=knock+AND+off So many of us are novice mechanics and we just don't know what to look for until it's too late. Let me know what you think |
BTW. I would be happy to moderate the thread if you think it's required
|
Roger,
That's your first mistake.:D |
Getting 70 psi in your Accusump, then pulling on the over-pressure relief valve to see if it worked.
It worked OK. |
Brent could pretty much fill that section up all by himself :LOL:
|
Sounds like a great Idea to me--I need all the help I can get while avoiding unneccesary mistakes:LOL:
|
Wilfy,,,speaking of pressure relief.....
Building a compressed air storage tank out of hot water heater tank. Got the compressor running and stood around the side of the house (peeking at it every once in awhile) to see if the air pressure relief valve would work.
,,,,,it didn't. When the tank blew it blew a hole in the foundation of house (cement and 2X6 like a tooth pick) and ripped the siding off all the way to the ceiling. Hey, at least I didn't catch anything on fire, which is WAY more typical of my "average" bone head mistake. Ernie :D |
Good idea for a new forum!
One of the first posts could be "Don't post the which is the best Cobra replica" question on ClubCobra unless you have done a search first or don't expect a straight response... :) |
| All times are GMT -7. The time now is 10:16 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: