-
Shop Talk
(
http://www.clubcobra.com/forums/shop-talk/)
| lineslinger |
02-05-2004 12:21 PM |
chassis support/rolling jack stands
I'm looking for info on a chassis carriage or some rolling jack stands to help me utilize the most of what limited space I have in my garage. Any of you guys out there who are interested in getting rid of one or can offer up the names of a supplier or a website I sure would appreciate it.
Thanks
|
| Karl Bebout |
02-05-2004 01:41 PM |
"Vehicle dollies" might do the trick for you. They are concave platforms with four casters each that you set your wheels on. The casters allow you to push the car around in any direction. I think that Harbor Freight sells them for about $60/pair and Parts America has them for $50 a pair. They are "647008 Wheel Dolly" at P.A. your can order from either on line.
|
| lineslinger |
02-05-2004 01:44 PM |
Thanks for the response Karlos, Ill check into both of them, have a good one.
|
| Michael C Henry |
02-08-2004 07:25 PM |
I'm useing four of the car dollies that Harbor Freight sells.Metal wheels turn(caster) well on cement floor.A little too wide for my tires(I've seen tires that wide but I do not have such.Ihave my supported by frame stands on these dollies now(Past year). I can push the car around the floor as needed.
|
| John McMahon |
02-08-2004 07:28 PM |
Kingsbury Dolly Co.
http://www.kingdolly.com/
You can use the dollies with the wheels on the car or use them with jackstands. I bought 4 for about $300 they support 1000 lbs. each |
| lineslinger |
02-09-2004 10:10 AM |
J. Henry and J. McMahon,
Thanks for the help on finding the right tool. Appreciate your time.
Mark
|
| All times are GMT -7. The time now is 07:06 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
