|
Roller Lifter Brand?
I plan to use a roller comp cams shaft for my 351W/392 stroker. Are there good reasons NOT to use Ford roller lifters? If so, what brand would you recommend for street/ocassional strip 6000 rpm operation?
Thanks, auto10x Bill |
HI auto10X
I assume you will use a hydraulic cam? If so, no problems or reasons not to that I have ever heard. They work fine in my motor.
|
I feel the best lifter by far for high RPM is the Crane link-bar type. We use this lifter in all of our 427 Windsor stroker engines This set up eliminates the stock lifter hold down system. Hope this helps.
|
| All times are GMT -7. The time now is 12:42 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: